Rearden DPB 5/8-24 Black Nitride (.375)

Rearden DPB 5/8-24 Black Nitiride (.375)

$89.00

Only 1 left in stock

Description

This can be used as a stand alone muzzle brake, but also doubles as a great suppressor mount.

 

The Rearden DPB is not only great as a muzzle brake, but it is also an incredible suppressor mount. The DPB gives you a taper before the threads design, which will not only help with concentricity, but this also means after hundreds of rounds, carbon won’t be on your threads. This will result in not having to worry about your suppressor getting carbon locked onto your muzzle device, and having your suppressor stuck to your gun. Rearden also added wrench flats to the back of the DPB, and includes the necessary shims to install this muzzle device. These muzzle devices will work with the Atlas, and the Atlas XL from Rearden MFG, but they are also compatible with the Plan B.

 

Some Suppressor Manufacturers Will Void Your Warranty If You Use A 3rd Party Mount and/or Adapter. No Matter How Good It Is.

 

  • 17-4 PH H900
  • Atlas and Atlas XL Compatible
  • Plan B Compatible
  • Atlas Adapter Overrun Approximately 1.600″
  • Atlas XL Adapter Overrun Approximately 0.750″
  • 5/8-24 Threads .375 Bore
  • Black Nitride Finish (67 HRC Surface Hardness)
  • Shims Included
  • 2.365″ Total Length

Additional information

This is an updated version that has larger wrench flats on the rear. Always use an alignment rod to ensure that the entire system is set up correctly. Make sure all surfaces are cleaned and the muzzle device has been torqued and Rockset to the barrel.Torque the muzzle device to approximately 30 ft lbs. Make sure the muzzle device is square against the shoulder. When setting the silencer on the muzzle device, ensure that the threads and tapers are clean. Torque the suppressor to 10 ft lbs. Ensure alignment. Enjoy.

Weight .25 lbs
Dimensions 7 × 2 × 9 in

Reviews

There are no reviews yet.

Be the first to review “Rearden DPB 5/8-24 Black Nitiride (.375)”

Your email address will not be published. Required fields are marked *

Post comment

You may also like…