Description

The Kore Essentials Belt X5 1.5″ is durable with micro adjustments.

The Kore Essentials EDC gun belt feature a 10” virtually indestructible, hidden track with 40+ size positions to adjust with. Now you can precisely adjust your gun belt in small 1/4” increments for a perfect fit. It’s the ultimate concealed carry belt for work, play, the range, or even out on the town.

Every Kore Essentials belt (leather & tactical) features a Proprietary Reinforced Power-Core™ center. This unique blend makes the Kore Essentials belt sturdy and stiff enough to support your firearm and gear without any sag, yet flexible enough to sit, walk, or move in all day. It’s the most secure, comfortable gun belt you will ever wear.

The Nylon tactical belt are stiffer and more rigid than the Kore Essentials leather gun belt, and intended to support heavier loads and more gear. Constructed using Nylon Web outer layer (rated to 500 lbs.), Reinforced Power-Core Center™ and Super-Fiber inner liner for added strength and durability. The tactical belt is designed to support holstered firearms or gear up to a maximum of 8 lbs. (total weight). Due to the stiffness of our tactical belts, they include a Belt Keeper to keep the belt tip flush with your pants.

Includes: X5 Buckle, Black Tactical Nylon Gun Belt 1.5″, one belt tip keeper, hex wrench & set screws

*These belts come uncut, and will be able to be sized from 24″-54″. Please view the “Additional Info” Tab for sizing instructions.

Additional information

Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44″ [XL & Tactical belts up to 54″]

Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.

On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler – ADD 4 inches and CUT – using sharp, heavy-duty scissors.
For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.
Using the wrench that is included, loosen the screws on the back of the buckle.
Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) – the buckle won’t break.
Tighten the screws until they are flush with the buckle. You will get resistance.
Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.
Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.